Carbon with your hands: car trim


Among the car owners now and then you can hearincomprehensible to many the phrase "make carbon". It is especially mysterious for those who know the meaning of the word "carbon" and understands that making it private at home is almost impossible.

In fact, the meaning of this expression is extremelyIt is simple, and its origin has a perfectly reasonable explanation. To start, perhaps, follows from the fact that among car owners is very popular decoration of cars with such material. But since the expressions "to finish with carbon" or "carve with carbon" are too long and do not sound very natural, motorists found a substitute for them - "make carbon".

Carbon is a composite material,made of carbon fiber - one of the most durable to date. It is stronger than most metals and is not subject to corrosion. In addition, it is much lighter - steel is heavier than it by 40%, and aluminum by 20%. In addition, the carbon on the car has a surprisingly attractive appearance. The combination of these qualities makes the finishing of cars it is very, very popular.

Another thing is that pleasure is veryexpensive, if you contact the auto show. The fact is that the carbon itself is not a cheap material, but finishing it with a car is a very labor-consuming and long-lasting occupation. That's why many car owners prefer to stick a carbon on their hands.

Yes-yes, it is sold in the form of a canvas (or film, as you wish), from which you can cut out the shape of the desired shape and paste it on the right place.

There are two types of car decorationmaterial. The first is a carbon interior trim that includes stickers on the steering wheel, front panel, doors and other interior elements. And the second is a lining on the hood, the roof, the outer part of the doors. The difference between these types of decoration is very small and it is in the size of the glued linings - the smaller it is, the easier it is.

So, to paste a carbon on your hands, you needfirst of all get the material itself. And it is better to take it with a reserve, since the first time it can not work. In addition, a hairdryer, a scalpel, a dishwashing detergent, a hose (preferably a soft plastic) will be required. It is very desirable to attract an assistant - the main thing is that he has "direct" hands!

Let's get down to business.To successfully paste the carbon with your own hands at home, it is necessary to thoroughly degrease the pasted surface - this is done with the most ordinary means for washing dishes. After that, a piece of the desired shape is cut from the piece of material. What is important is that it is necessary to cut with a reserve, so that it is possible to stretch and smooth the carbon. With their own hands, it's simply impossible to cover anything with them.

No glue should be used - it is alreadyshould be on carbon. Cutting off the desired piece with a scalpel, you need to carefully remove the protective layer (a thin film on the adhesive side) and start gently, gradually sticking the carbon fiber patch on the car. Carbon should fill every dent and roughness - only then it will hold.

If somewhere in the course of gluing formed a fold, do not start remaking everything - you can just re-paste part of the film - if it's quality, then it's possible.

After the carbon is smoothly glued to the entire surface, it's time to use the dryer - it is necessary to thoroughly warm up every centimeter of the coating with hot air.

Now it's up to the little one - to let the film cool down - andready! The car looks completely new. Reading this manual for finishing the car, you can conclude that it is quite easy to paste a carbon with your own hands, and certainly much cheaper than driving a car into a car dealership!

Comments (0)
Add a comment